Panasonic KX-TG9541 Operating Instructions Manual page 25

To talk with only one caller, press ML1N or
ML2N for the party with which you want to
continue talking. To resume both lines,
press MCONFN.
Conference call with an outside call and an
intercom call
While you are talking with an outside caller, one
more extension can join the conversation and
establish a conference call.
1
During an outside call, press MMENUN to put
the call on hold.
2
MbN: "Intercom" a MSELECTN
3
MbN: Select the desired unit. a MSELECTN
4
When the paged party answers, press
MMENUN. a MbN: "Conference" a
MSELECTN
R If the paged party does not answer, press
MBACKN to return to the outside call.
R The 2 calls are combined.
R To leave the conference, press MOFFN. The
other 2 parties can continue the
conversation.
Note:
R The outside call can be put on hold by press
MMENUN. a MbN: "Hold" a MSELECTN. Only
the person who placed the call on hold can
resume the full conference by press MMENUN.
a MbN: "Conference" a MSELECTN.
Transferring a cellular call between
the handset and a cellular phone
Transferring a cellular call from the handset to
a cellular phone
1
Press MMENUN during a cellular call.
2
MbN: "Transfer to cell" a MSELECTN
R The cellular call is transferred to the cellular
phone.
Note:
R Depending on your cellular phone type, you
may need to set the cellular phone to be ready
to talk before transferring. For example, if your
cellular phone has a top cover, open it
beforehand.
R You can also transferring a cellular call as
follows:
Press and hold MCELLN.
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls Using the Handset
Transferring a cellular call from a cellular
phone to the handset
During a conversation using a cellular phone, the
call cannot be transferred to the handset by the
cellular phone. Perform the following with the
handset.
1
During a conversation using a cellular phone,
press MCELLN.
R The call is transferred to the handset when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
(page 20).
2
MbN: Select the desired cellular phone. a
MSELECTN
R The call is transferred to the handset.
Using the other line during a
conversation
You can handle a cellular call and a landline call at
the same time. When another call is being
received during a conversation, the interrupt tone
sounds (page 40), and the 2nd caller's
information is displayed if you subscribe to Caller
ID (page 47). You can answer the 2nd call while
holding the 1st call.
Making/answering a cellular call during a
conversation on the landline
1
Press MMENUN during a landline call.
2
MbN: "Hold" a MSELECTN
3
To make a 2nd call:
Dial the phone number. a MCELLN
Select the desired cellular phone. a
MSELECTN
*1 The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
To answer a 2nd call:
MCELLN
R To hold the 2nd call: MMENUN a MbN:
"Hold" a MSELECTN
4
To hang up the 2nd call and return to the 1st
call (landline call), press MOFFN, then press
ML1N or ML2N.
Making/answering a landline call during a
conversation on a cellular line
1
Press MMENUN during a cellular call.
*1
a MbN:
25