Table of Contents
Advertisement
Quick Links
TG9361BX(e)_OI.book Page 1 Wednesday, April 16, 2008 3:08 PM
Operating Instructions
Expandable Digital Cordless Phone
KX-TG9361BX
Model No.
This unit is compatible with Caller ID. You must subscribe to the appropriate
service offered by your service provider/telephone company.
Charge the batteries for about 7 hours before initial use.
Please read these operating instructions before using the unit and save
them for future reference.
Advertisement
Table of Contents
Related Manuals for Panasonic KX-TG9361BX
Summary of Contents for Panasonic KX-TG9361BX
-
Page 1: Operating Instructions
TG9361BX(e)_OI.book Page 1 Wednesday, April 16, 2008 3:08 PM Operating Instructions Expandable Digital Cordless Phone KX-TG9361BX Model No. This unit is compatible with Caller ID. You must subscribe to the appropriate service offered by your service provider/telephone company. Charge the batteries for about 7 hours before initial use. -
Page 2: Table Of Contents
TG9361BX(e)_OI.book Page 2 Wednesday, April 16, 2008 3:08 PM Table of Contents Introduction Index Product information ....3 Index......38 Accessory information . -
Page 3: Introduction
TG9361BX(e)_OI.book Page 3 Wednesday, April 16, 2008 3:08 PM Introduction Product information Thank you for purchasing a Panasonic digital cordless phone. Important: L The suffix (BX) in the following model number will be omitted in these instructions: KX-TG9361BX Base unit Handset Model No. -
Page 4: Accessory Information
*2 The handset cover comes attached to the handset. Replacement battery information L Please contact your nearest Panasonic dealer for sales information. L Replace batteries only with a nickel metal hydride (Ni-MH) type of battery. This model requires 2 AAA (R03) batteries for every handset. For best performance, we recommend using Panasonic rechargeable batteries (Order No. -
Page 5: For Your Safety
TG9361BX(e)_OI.book Page 5 Wednesday, April 16, 2008 3:08 PM Introduction Radio waves emitted from this product may cause such devices to For your safety malfunction resulting in an accident. To prevent severe injury and loss of Operating safeguards life/property, read this section carefully L Unplug the product from power outlets before using the product to ensure before cleaning. -
Page 6: Important Safety Instructions
Base unit location/avoiding noise and/or the conductive material to The base unit and other compatible overheat and cause burns. Panasonic units use radio waves to L Charge the batteries provided with or communicate with each other. identified for use with this product... - Page 7 TG9361BX(e)_OI.book Page 7 Wednesday, April 16, 2008 3:08 PM Introduction computers, wireless devices or Routine care other phones. L Wipe the outer surface of the – avoid facing radio frequency product with a soft moist cloth. transmitters, such as external L Do not use benzine, thinner, or any antennas of mobile phone cell abrasive powder.
-
Page 8: Preparation
TG9361BX(e)_OI.book Page 8 Wednesday, April 16, 2008 3:08 PM Preparation Handset Controls Base unit A Charge contacts B {LOCATOR} A Speaker B {MENU} C Soft keys D Headset jack E {C} (TALK) F {s} (SP-PHONE: Speakerphone) G Dial keypad ({*}: TONE) H {FLASH} {CALL WAIT} I Charge indicator Ringer indicator... -
Page 9: Display
{^} to increase the (C). volume, or press {V} to decrease the L Use only the supplied Panasonic AC volume repeatedly while talking. adaptor PQLV207BX. Volume up L Use only the supplied telephone line cord. -
Page 10: Battery Installation And Replacement
TG9361BX(e)_OI.book Page 10 Wednesday, April 16, 2008 3:08 PM Preparation – We recommend using the If you subscribe to a DSL/ADSL Panasonic rechargeable batteries service noted on page 4, 6. Please attach a DSL/ADSL filter (contact Release the battery cover latch and your DSL/ADSL provider) to the lift the cover open. -
Page 11: Battery Charge
L While charging, “Charging” is engaged in a call. displayed and the charge indicator on the handset lights up. When the Panasonic Ni-MH battery batteries are fully charged, “Charge performance (supplied batteries) completed” is displayed. Operation... -
Page 12: Symbols Used In These Operating Instructions
TG9361BX(e)_OI.book Page 12 Wednesday, April 16, 2008 3:08 PM Preparation handset on the base unit or charger and let it charge for at least 7 hours. Setting up the unit before use Symbols used in these Dialing mode operating instructions If you cannot make calls, change this setting according to your telephone line Symbol... -
Page 13: Making/Answering Calls
TG9361BX(e)_OI.book Page 13 Wednesday, April 16, 2008 3:08 PM Making/Answering Calls {Erase} i {Yes} i {OFF} Making calls Pause (for PBX/long distance service users) Lift the handset and dial the phone A pause is sometimes required when number. making calls using a PBX or long L To correct a digit, press {Clear}. -
Page 14: Useful Features During A Call
TG9361BX(e)_OI.book Page 14 Wednesday, April 16, 2008 3:08 PM Making/Answering Calls To return to the conversation, press Adjusting the handset ringer volume {Mute} again. Press {^} or {V} repeatedly to select the Note: desired volume while the handset is L {Mute} is a soft key visible on the ringing for an incoming call. -
Page 15: Dial Lock
TG9361BX(e)_OI.book Page 15 Wednesday, April 16, 2008 3:08 PM Making/Answering Calls Temporary tone dialing (for Dial lock rotary/pulse service users) This feature prohibits making outside You can temporarily switch the dialing calls. The default setting is OFF. mode to tone when you need to access touch-tone services (for example, Important: answering services, telephone banking... -
Page 16: Shared Phonebook
TG9361BX(e)_OI.book Page 16 Wednesday, April 16, 2008 3:08 PM Shared Phonebook Character table for entering names Shared phonebook Character The shared phonebook allows you to & ’ – . make calls without having to dial a b c A B C 2 manually. -
Page 17: Chain Dial
TG9361BX(e)_OI.book Page 17 Wednesday, April 16, 2008 3:08 PM Shared Phonebook Searching by first character Chain dial (alphabetically) This feature allows you to dial phone numbers in the phonebook while you are {Phonebook} i {Search} on a call. This feature can be used, for Press the dial key ({0} –... -
Page 18: Programming
TG9361BX(e)_OI.book Page 18 Wednesday, April 16, 2008 3:08 PM Programming Programmable settings You can customize the unit by programming the following features using the handset. To access the features, there are 2 methods: – scrolling through the display menus (page 18) –... - Page 19 TG9361BX(e)_OI.book Page 19 Wednesday, April 16, 2008 3:08 PM Programming *1 If you program these settings using one of the handsets, you do not need to program the same item using another handset. *2 If the Caller ID time and date display service is available in your area, this feature allows the unit to automatically adjust the date and time setting when caller information is received.
- Page 20 TG9361BX(e)_OI.book Page 20 Wednesday, April 16, 2008 3:08 PM Programming Programming using the direct commands {MENU} i {#} Enter the desired feature code. Enter the desired setting code. i {Save} L This step may vary depending on the feature being programmed. L To exit the operation, press {OFF}.
- Page 21 TG9361BX(e)_OI.book Page 21 Wednesday, April 16, 2008 3:08 PM Programming Feature Feature Setting code System Page code setting – Time adjustment {1}: Caller ID[auto] {2}{2}{6} (Caller ID subscribers {0}: <Manual> only) *1 If “System setting” column is checked, you do not need to program the same item using another handset.
-
Page 22: Special Instructions For Programmable Settings
TG9361BX(e)_OI.book Page 22 Wednesday, April 16, 2008 3:08 PM Programming {Save} Special instructions {V}/{^}: “Block calls” i {Select} for programmable {Yes} i {OFF} settings Storing unwanted callers by entering phone numbers Block calls (Caller ID {MENU} i {#}{2}{1}{7} i subscribers only) {Add} This feature allows the unit to reject calls Enter the phone number (32 digits... -
Page 23: Registering A Unit
TG9361BX(e)_OI.book Page 23 Wednesday, April 16, 2008 3:08 PM Programming L If you have set the alarm, the alarm Turns alarm off. Go to sounds even if the night mode is step 5. turned on. An alarm sounds once at Once the set time. -
Page 24: Base Unit
TG9361BX(e)_OI.book Page 24 Wednesday, April 16, 2008 3:08 PM Programming Registering a handset to a base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, register the handset. Handset: {MENU} i {#}{1}{3}{0} Base unit:... -
Page 25: Caller Id Service
TG9361BX(e)_OI.book Page 25 Wednesday, April 16, 2008 3:08 PM Caller ID Service Phonebook name display Using Caller ID service When caller information is received and it matches a phone number stored in the Important: phonebook, the stored name in the L This unit is Caller ID compatible. -
Page 26: Caller List
TG9361BX(e)_OI.book Page 26 Wednesday, April 16, 2008 3:08 PM Caller ID Service Enter your area code (8 digits max.). L To correct a digit, press {<} or Caller list {>} to move the cursor, then press {Clear}. Enter the correct Important: number. - Page 27 TG9361BX(e)_OI.book Page 27 Wednesday, April 16, 2008 3:08 PM Caller ID Service Storing caller information into the phonebook {View CID} {V}/{^}: Select the desired entry. i {Select} L To edit the number, press {Edit}, then edit the number (see step 3, “Editing a caller’s phone number before calling back”, page 26).
-
Page 28: Intercom/Locator
TG9361BX(e)_OI.book Page 28 Wednesday, April 16, 2008 3:08 PM Intercom/Locator Intercom Transferring calls, conference calls Intercom calls can be made between handsets. Outside calls can be transferred Note: between 2 handsets. 2 handsets can L If you receive an outside call while have a conference call with an outside talking on the intercom, you hear 2 party. -
Page 29: Handset Locator
TG9361BX(e)_OI.book Page 29 Wednesday, April 16, 2008 3:08 PM Intercom/Locator Handset locator You can locate a misplaced handset by paging it. Base unit: {LOCATOR} L All registered handsets beep for 1 minute. To stop paging: Base unit: Press {LOCATOR}. Handset: Press {OFF}. -
Page 30: Useful Information
TG9361BX(e)_OI.book Page 30 Wednesday, April 16, 2008 3:08 PM Useful Information Insert the hooks on the wall mounting adaptor into the holes 1 Wall mounting and 2 on the base unit. Base unit Lead the telephone line cord through the hole in the wall mounting adaptor in the direction of the arrow. -
Page 31: Belt Clip
TG9361BX(e)_OI.book Page 31 Wednesday, April 16, 2008 3:08 PM Useful Information Connect the telephone line cord. Drive the screws (not included) into Belt clip the wall. Mount the unit, and then slide it down. Connect the AC You can hang the handset on your belt or adaptor to power outlet (page 9). -
Page 32: Error Messages
TG9361BX(e)_OI.book Page 32 Wednesday, April 16, 2008 3:08 PM Useful Information Error messages If the unit detects a problem, one of the following messages is shown on the display. Display message Cause/solution L The called handset is in use. Busy L Other units are in use and the system is busy. -
Page 33: Troubleshooting
TG9361BX(e)_OI.book Page 33 Wednesday, April 16, 2008 3:08 PM Useful Information Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then insert the batteries into the handset again. General use Problem Cause/solution... - Page 34 TG9361BX(e)_OI.book Page 34 Wednesday, April 16, 2008 3:08 PM Useful Information Battery recharge Problem Cause/solution The handset beeps and/or L Battery charge is low. Fully charge the batteries 7 flashes. (page 11). I fully charged the batteries, L Clean the charge contacts and charge again but 7 still flashes or 8 (page 11).
- Page 35 TG9361BX(e)_OI.book Page 35 Wednesday, April 16, 2008 3:08 PM Useful Information Caller ID Problem Cause/solution Caller information is not L You need to subscribe to Caller ID service. displayed. Contact your service provider/telephone company for details. L If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack.
- Page 36 TG9361BX(e)_OI.book Page 36 Wednesday, April 16, 2008 3:08 PM Useful Information Dial lock Important: L Anyone can turn off the dial lock using the following method. Be sure to keep these operating instructions in a safe place in order to prevent unauthorized persons from using your phone without permission.
-
Page 37: Specifications
TG9361BX(e)_OI.book Page 37 Wednesday, April 16, 2008 3:08 PM Useful Information *1 If you purchase an optional handset, a charger is included. Specifications Note: ■ Number of channels: L Design and specifications are subject 60 Duplex Channels to change without notice. ■... - Page 38 TG9361BX(e)_OI.book Page 38 Wednesday, April 16, 2008 3:08 PM Index Phonebook: 16 Power failure: 9 Index Redialing: 13 Ringer tone: 20 Additional handset: 23 Rotary/pulse service: 15 Alarm: 23 Answering calls: 13 SP-PHONE (Speakerphone): 13 Area code: 26 Time adjustment: 21 Auto talk: 13 Transferring calls: 28 Battery: 10, 11...
- Page 39 TG9361BX(e)_OI.book Page 39 Wednesday, April 16, 2008 3:08 PM Notes...
- Page 40 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd.