The navigation window displays
the remote server. The available
remote server information are
displayed on the Detail/SEL
window.
4.
Use any of these options to connect to the server:
•
Click
before the remote server to display the remote server information,
then select from the list.
•
Double-click a remote server information from the Detail/SEL window.
•
Click Server, then select Connect.
5.
When prompted, enter the default
user name (admin) and password
(admin).
6.
Set the connection request level
authentication and privilege, then
click OK.
•
The default connection request level authentication is HMAC-SHA1 with
Administrator privileges. You may change these configuration according to
your network settings or preference.
•
Check the box before Enable Payload Encryption if you want to use
Advanced Encryption Standard (AES).
ASUS ASMB6-iKVM
Z9PE-D16
3-7