Configure Bmc Ip Source Dhcp - Asus ASMB6-IKVM User Manual

2.3.3

Configure BMC IP source DHCP

1. Repeat the step 1-4 in the previous sub-section.
On reboot, the main menu appears. Select Configure BMC IP Source DHCP
2.
for LAN1 (or DM_LAN1), and press <Enter> to enter the sub-menu.
FreeDOS command prompt
Configure BMC IP Source Static IP for LAN1
Configure BMC IP Source DHCP for LAN1
Configure BMC IP Source Static IP for DM_LAN1
Configure BMC IP Source DHCP for DM_LAN1
ASMB6 Firmware Update for Preserve Configuration (SDR,LAN,Username)
ASMB6 Firmware Update for Clear Configuration (SDR,LAN,Username)
3. A confirmation message appears, asking if you want to configure the BMC IP
source DHCP now. Select <Yes> to continue.
WARNING !!!
CONFIGURE BMC IP Source DHCP NOW !
DO YOU WANT TO CONTINUE ?
4. When the configuration is completed, the below screen appears.
Detect Motherboard
Detect KCS Interface
New BMC IP Source : DHCP
Press any key to continue ...
5. Then you can get IP from DHCP server.
ASUS ASMB6-iKVM
ASUS Server Z9PE-D16 MB
-> (Z9PE-D16 Series)
No Yes
2-7