Introduction; Static Electricity Precautions - Asus 3DP-V500TX User Manual

II. HARDWARE INSTALLATION

Introduction

The board will have been configured for the options installed at the factory. Before
installing the board, please check that the jumper settings are correct and that you
have taken note of the static electricity precautions.

Static Electricity Precautions

1. ASUS 3DP-V500TX boards are supplied with disposable grounding wrist
straps. Follow the supplied instructions.
2. Alternatively, before handling any components or touching anything inside
the system unit, discharge your body static electric charge by holding onto a
grounding surface. If the system unit is connected to a grounded outlet, you
can touch a suitable part of the system metal chassis.
3. Do not remove boards from their antistatic bags until you are ready to install
them.
4. When handling boards, hold them by their edges and their metal mounting
brackets. Avoid touching components on the board and the edge connectors
that plug into the expansion slots.
5. Avoid plastic, vinyl and styrofoam in your work area.
ASUS 3DP-V500TX 3