Firmware Update And Ip Configuration; Firmware Update - Asus ASMB6-IKVM User Manual

2.3

Firmware update and IP configuration

You need to update the ASMB6-iKVM firmware and configure IP source before
you start using the ASMB6-iKVM board.
2.3.1

Firmware update

To update the firmware:
1. Insert the support CD into the optical drive.
2. Restart the remote server, then press <Del> during POST to enter the BIOS
setup.
3. Go to Boot menu and set the Boot Device Priority item to [CD-ROM].
4. When finished, press <F10> to save your changes and exit the BIOS setup.
5. On reboot, the main menu appears. Select ASMB6-iKVM Firmware Update
for Preserve Configuration, and press <Enter> to enter the sub-menu.
FreeDOS command prompt
Configure BMC IP Source Static IP for LAN1
Configure BMC IP Source DHCP for LAN1
Configure BMC IP Source Static IP for DM_LAN1
Configure BMC IP Source DHCP for DM_LAN1
ASMB6 Firmware Update for Preserve Configuration (SDR,LAN,Username)
ASMB6 Firmware Update for Clear Configuration (SDR,LAN,Username)
6. A confirmation message appears, asking whether you want to update the
firmware or not. Select <Yes> to update.
WARNING !!!
UPDATE ASMB6 FIRMWARE NOW !
DO YOU WANT TO CONTINUE ?
The firmware updating process starts.
2-4
ASUS Server Z9PE-D16 MB
No Yes
Chapter 2: Installation