Q-See QSZ515D User Manual page 2

Thank You for Choosing a Q-See Product!
All of our products are backed by a conditional service warranty covering all hardware for 12 months from the date of purchase.
Additionally, our products also come with a free exchange policy that covers all manufacturing defects for one month from the date of
purchase. Permanent upgrading service is provided for the software and is available at www.Q-See.com.
Be certain to make the most of your warranty by completing the registration form online. In addition to warranty and technical support
benefits, you'll receive notifications of product updates along with free downloadable firmware updates for your DVR. Register today
at www.Q-See.com!
Please see the back of this manual for exclusions.
© 2011 Q-See. Reproduction in whole or in part without written permission is prohibited. All rights reserved. This manual and
software and hardware described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable
form without prior written approval.
Trademarks: All brand names and products are trademarks or registered trademarks of their respective owners.
Q-See is a registered trademark of DPS, Inc.
Disclaimer: The information in this document is subject to change without notice. The manufacturer makes no representations or
warranties, either express or implied, of any kind with respect to completeness of its contents.
Manufacturer shall not be liable for any damages whatsoever from misuse of this product.
2
Introduction
This manual is written for the QSZ515D high-speed PTZ camera and was accurate at the time it was completed. However, because
of our ongoing effort to constantly improve our products, additional features and functions may have been added since that time
and on-screen displays may change. We encourage you to visit our website at www.Q-See.com to check for the latest product
announcements. You can also find technical details and an electronic version of this manual the QSZ515D's product page at our site.
Throughout the manual we have highlighted warnings and other important information that will assist you in operating your new
system in a safe and trouble-free manner. Please take the time to read and follow all instructions and pay attention to alerts as
shown below:
IMPORTANT! Red boxes with this icon indicate warnings. To prevent possible injury or
damage to the product, read all warnings before use.
NOTE! Text in blue boxes with the Information icon offer additional guidance and explanations
about how to make the most out of your system.
For your safety and to protect your camera
To prevent damage to your Q-See product or injury to yourself or to others, read and understand the following safety precautions in
their entirety before installing or using this equipment.
WARNING! ELECTRIC SHOCK RISK!
n Care should be taken during transportation, storage and installation of this camera to avoid rough handling, dropping, or other
abuse in order to prevent damage to the optics or components inside the camera.
n Camera should be installed in accordance with electrical standards including keeping the camera and cable away from high
voltage, using a surge protector and using only the rated power supply.
n Do not use strong or abrasive cleaners on camera body or lens. Use a damp cloth for cleaning the housing and a lens cloth for the
optics.
Do not attempt to disassemble the camera. Only authorized, trained technicians should service this camera.
n
n The camera should not be immersed in water and should be mounted in a sheltered location. Do not point camera directly at the
sun or other strong light source.
Rev. 1.0 10/19/11
3