HP 15 Maintenance And Service Manual page 80

Notebook pc
Table of Contents

Advertisement

5.
Remove the display assembly (2).
If it is necessary to replace any of the display assembly subcomponents:
1.
To remove the display bezel:
a.
Remove the two Mylar screw covers (1) and the two Phillips PM2.5×4.5 screws (2) that secure the
display bezel to the display assembly. The Mylar screw covers are included in the Rubber Kit, spare
part number 747133-001 for HP 15 and Compaq 15 models, 756215-001 for HP 250 models, and
751418-001 for HP 255 models.
NOTE:
following image.
72
Chapter 4 Removal and replacement procedures
In this procedure, the display will NOT be connected to the computer, as shown in the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

15 touchsmart250 g2Compaq 15255 g2Compaq 15 touchsmart

Table of Contents