Processor - HP 15 Maintenance And Service Manual

Reverse this procedure to reassemble and install the fan/heat sink assembly.

Processor

NOTE: This section applies only to computer models equipped with an Intel processor. AMD processors
come soldered to the system board and cannot be removed or replaced.
NOTE: The processor spare part kit includes replacement thermal materials.
Description
Intel Core i5 3230M processor (2.60-GHz 3.0-MB L3 cache, dual core, 35 W)
Intel Core i3 4000M processor (2.40-GHz, 3.0-MB L3 cache, dual core)
Intel Core i3 3110M processor (2.40-GHz, 3.0-MB L3 cache, dual core)
Intel Pentium 2020M processor (2.40-GHz, 2.0-MB L3 cache, dual core, 35 W)
Intel Celeron 1000M processor (1.8-GHz, 2.0-MB L3 cache, dual core, 35 W)
Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
● Service door (see
●
WLAN module (see
● Top cover (see
●
System board (see
● Fan/heat sink assembly (see
To remove the processor:
1. Position the system board upside down.
2. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2) until you hear a click.
Battery on page 49), and then remove the following components:
Service door on page 55)
WLAN module on page
Top cover/keyboard on page
System board on page
Fan/heat sink assembly on page
58)
61)
83)
88)
Component replacement procedures
Spare part number
711903-002
737327-001
682417-001
700628-001
713162-001
95