Safety Warnings; Installation; Connecting The Hob To The Mains Power Supply - Caple C850I Instruction Manual

Induction hob

Table of Contents

This hob must be connected to the mains power supply only by a suitably qualified person.

Before connecting the hob to the mains power supply, check that:

1. the domestic wiring system is suitable for the power drawn by the hob.

2. the voltage corresponds to the value given in the rating plate

3. the power supply cable sections can withstand the load specified on the rating plate.

To connect the hob to the mains power supply, do not use adapters, reducers, or branching

devices, as they can cause overheating and fire.

The power supply cable must not touch any hot parts and must be positioned so that its

temperature will not exceed 75˚C at any point.

Check with an electrician whether the domestic wiring system is suitable without alterations.

Any alterations must only be made by a qualified electrician.

• If the cable is damaged or to be replaced, the operation must be carried out the

by after-sale agent with dedicated tools to avoid any accidents.

• If the appliance is being connected directly to the mains an omnipolar

circuit-breaker must be installed with a minimum opening of 3mm between

contacts.

• The installer must ensure that the correct electrical connection has been made

and that it is compliant with safety regulations.

• The cable must not be bent or compressed.

• The cable must be checked regularly and replaced by authorised technicians

only.

Safety Warnings

Your safety is important to us. Please read this information before using your

cooktop.

Electrical Shock Hazard

• Disconnect the appliance from the mains electricity supply before carrying

Table of Contents