Advertisement
24 3D Blaster GeForce2 GTS Installation Guide
When you restart Windows, one of the following error messages appears:
"BlasterControl will only work on Creative graphics product drivers.
Do you want BlasterControl to be loaded the next time you start Windows?"
"BlasterControl will only work on Creative graphics product drivers."
Cause
3D Blaster GeForce2 GTS drivers, required by BlasterControl, may have been
replaced by other drivers when you installed DirectX applications.
Solution
Re-install or revert to the 3D Blaster GeForce2 GTS drivers.
To revert to the drivers:
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the Settings tab, and then click
the Change Display Type button or the Advanced Properties button.
3. In the Adapter Type group box or on the Adapter tabbed page, click the
Change button.
4. In the Select Device dialog box, click Creative GB0010, and then click the
OK button.
5. In the Insert Disk message box, click the OK button without inserting any
CD.
6. If 3D Blaster GeForce2 GTS drivers and later versions of DirectX drivers are
already installed, click the Skip File button until the Adapter Type group box
or the Adapter tabbed page appears.
7. Click the two Close buttons to close the Display Properties dialog box.
8. When prompted to restart your system, click the Yes button.
After you have restarted your system, the newer DirectX drivers will work
with the latest 3D Blaster GeForce2 GTS drivers.
Advertisement
