Advertisement
5. Locate a free AGP expansion slot.
Figure 2 shows the various types of expansion slots.
6. Remove the metal plate from the free AGP slot.
Keep the screw and metal plate for future use.
7. Align the bus connector of the graphics card with the
expansion slot.
8. Press the card's bus connector firmly and evenly into
the slot, making sure that the bus connector comes
into full contact with the slot. Then, secure the card
to the computer casing with a screw. See Figure 3
below.
ii.Secure the card to the slot
with a screw.
Figure 3: Securing the graphics card to the slot.
A PCI slot
An ISA slot
Figure 2: Types of expansion slots.
i. Press the card into the slot. Ensure that
the bus connector has been pressed in as
far as it will go and is sitting firmly inside
the expansion slot.
Warning: However do not force the
graphics card into place. If it does not fit
properly, remove it and try again.
3D Blaster GeForce2 GTS Installation Guide 5
An AGP slot
Advertisement
