Advertisement
Monitor display exhibits pixel drop (that is, pixels, usually white in color, appear on the
screen) or other abnormal behavior.
Cause
The settings that you have selected for your graphics card may be incompatible
with one or more games or applications that you are running.
Solution
Use the factory default settings:
1. Click Start -> Programs -> Creative -> BlasterControl Display Center.
2. Click the Tweak button to start BlasterControl Tweak Center.
3. Click the Defaults button.
When the system is starting up, there is a series of prolonged beeps.
Cause
Your 3D Blaster GeForce2 GTS card may not be firmly inserted into the
expansion slot.
Solution
Ensure that the bus connector of the graphics card is fully inserted into the
expansion slot. Ensure this by pressing the card gently and evenly into the slot.
You can also try removing the card and re-inserting it.
In Windows 95 or Windows 98, the installation program for BlasterControl does not run
automatically after you have inserted the installation CD into your drive.
Cause
The AutoPlay feature in your Windows 95 or Windows 98 system is not enabled.
Solution
To install the software from the CD:
1. Double-click the My Computer icon on your Windows desktop.
2. In the My Computer window, double-click the Creative 3D Blaster
GeForce2 GTS icon.
If the installation program does not run, double-click the Windows folder
icon followed by the Setup icon.
3. Follow the instructions on the screen to complete the installation.
3D Blaster GeForce2 GTS Installation Guide 23
Advertisement
