Advertisement
To do so in Windows 98 and Windows 95 and Windows 2000:
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the Settings tab.
3. In the Screen Area group box, move the slider to set the desired resolution.
4. In the Colors group box, select the desired color. Certain colors may not be available for
some display resolutions.
5. Cick the Apply button.
6. If you change the colors setting, you may see a 'Compatability Warning'. Select Apply the
new color settings without restarting and click OK.
7. If you change the Screen Area a message will be displayed stating Windows will resize your
desktop. Click OK.
8. If your screen becomes corrupt, wait 15 seconds and Windows will restore your original
settings.
For Windows NT 4.0:
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the Settings tab.
3. In the Desktop Area group box, move the slider to set the desired resolution.
4. In the Color Palette group box, select the desired color. Certain colors may not be available
for some display resolutions.
5. In the Refresh Frequency group box, select the desired refresh rate.
6. To test the settings, click the Test button, and then click the OK button.
When the Testing Mode dialog box re-appears:
•
If the test bitmap is properly displayed, click the Yes button.
•
If not, click the No button. A warning message will be displayed. Click the OK button
and repeat steps 3 through 6, changing one or more of the settings.
7. Click the OK button to close the Display Properties dialog box.
3D Blaster GeForce2 GTS Installation Guide 11
Advertisement
