Adjusting The Response Positions Of The Touch Panels (Touch Panel Calibration) - Pioneer AVIC-F700BT Operation Manual

Chapter
21 Customising preferences
p Immediately verify whether the display
changes to a rear view camera image when
the gearstick is moved to REVERSE (R)
from another position.
p When the whole screen changes to a rear
view camera image during normal driving,
switch to another setting.
p Initially, this function is set to "Off".
Touch [Back Camera] on the "System
1
Settings" menu.
= For details, refer to Displaying the "System
Settings" menu on page 120.
The "Camera Input" screen appears.
Touch [On] next to "Camera" to acti-
2
vate the camera setting.
p Unless this setting is [On], you cannot
switch to "RearView".
3 Touch [Battery] or [GND] next to
"Polarity" to select the appropriate polarity
setting.
! Battery — When the polarity of the con-
nected lead is positive while the gearstick is
in the REVERSE (R) position
! GND — When the polarity of the connected
lead is negative while the gearstick is in the
REVERSE (R) position
Adjusting the response
positions of the touch panels
(touch panel calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel screen.
p Make sure to use the supplied stylus for ad-
justment and gently touch the screen. If
you press the touch panel forcefully, the
touch panel may be damaged. Do not use
a sharp pointed tool such as a ballpoint
pen or a mechanical pen. Otherwise the
screen may become damaged.
122
Engb
Stylus (supplied with the navigation
system)
Touch [Screen Calibration] on the "Sys-
1
tem Settings" menu.
A message confirming whether to start the ca-
libration appears.
p You can also start the calibration by keep
pressing MENU button on the "Top Menu".
2 Touch [OK].
3 With the stylus, touch and hold the ar-
rows that point to the centre and corners
of the LCD screen.
The arrow indicates the order.
4 Touch anywhere on the screen.
The adjusted position data will be saved.
p Do not turn off the engine while saving the
adjusted position data.
5 Touch [OK].