Connecting And Disconnecting Ipod; Connecting Your Ipod; Disconnecting Your Ipod; Flow From Startup To Termination - Pioneer AVIC-F700BT Operation Manual

Navigation av system
Hide thumbs Also See for AVIC-F700BT:
Table of Contents

Advertisement

Basic operation
Connecting and
disconnecting iPod
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.

Connecting your iPod

Using the USB interface cable for iPod en-
ables you to connect your iPod to the naviga-
tion system.
p For connection, USB interface cable for
iPod (CD-IU230V) (sold separately) is re-
quired.
1
Pull out the USB storage device after
checking that no data is being accessed.
To AV input on the back of the navigation system
USB connector
p For more details about iPod compatibility
with this navigation system, refer to the in-
formation on our website.
p Connection via USB hub is not available.
2
Connect your iPod.
USB interface cable for
iPod

Disconnecting your iPod

% Pull out the USB interface cable for iPod
after checking that no data is being ac-
cessed.
Flow from startup to
termination
1
Start the engine to boot up the system.
After a short pause, the navigation splash
screen comes on for a few seconds.
p To protect the LCD screen from damage, be
sure to use your fingers to touch the touch
panel keys. (The stylus is supplied for spe-
cial calibrations. Do not use the stylus for
normal operations.)
2
Turn off the vehicle engine to termi-
nate the system.
The navigation system is also turned off.

On first-time startup

CAUTION
The rear view camera function is not available for
safety reasons until the navigation system boots
up completely.
When you use the navigation system for the
first time, select the language that you want to
use.
1
Start the engine to boot up the system.
After a short pause, the navigation splash
screen comes on for a few seconds.
Chapter
02
15
Engb

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic-f900bt

Table of Contents