Playing The Audio Cd; Reading The Screen; Using The Touch Panel Keys - Pioneer AVIC-F700BT Operation Manual

Chapter
09

Playing the audio CD

You can play a normal music CD using the
built-in drive of the navigation system. This
section describes these operations.
1 Insert the disc you want to play into
disc-loading slot.
Playback starts from the first track of the CD.
Touch [DISC] on the "AV Source" menu
2
to display the "CD" screen.
= For details concerning operations, refer to
Screen switching overview on page 18.
3 Use the touch panel keys on the screen
to control the disc.

Reading the screen

1 2
1 Source icon
Shows which source has been selected.
2 Track number indicator
Shows the number of the track currently play-
ing.
3 Repeat/Random/Scan indicator
The marks shown below indicate the current
playback status.
and repeat range: Displays the current
repeat range
: Random
: Scan
4 Play time indicator
Shows the elapsed playing time of the current
track.
62
Engb
3 4

Using the touch panel keys

Touch panel keys
1 Recalls equaliser curves
= For details, refer to Recalling equaliser
curves on page 125.
2 Displaying the "Function" menu
= For details, refer to Using the
"Function" menu on the next page.
3 Switching the playing part
= For details, refer to Switching the play-
ing part on page 64.
4 Skipping the track forward or backward
Touching [p] skips to the start of the next
track. Touching [o] once skips to the start
of the current track. Touching it again will skip
to the previous track.
Fast rewind or forward
Keep touching [o] or [p] to perform fast
rewind or forward.
p Fast rewind is cancelled when it reaches
the beginning of the first track on the
disc.
p Moving MULTI-CONTROL left or right
enables you to perform the equivalent
operations.
5 Playback and Pause
Touching [f] switches between "playback"
and "pause".
6 Shuffle All
All of the songs in the disc can be played at
random by touching only one key.
p [Shuffle All] is not available for AVIC-
F700BT.
p To cancel the random play, switch [Ran-
dom] to [Off] on the "Function" menu.
7 Displaying the map screen
1 2
3
4
5
6
7