Included Gobos
Changing
Gobos
Gobo Replacement Diagram
Page 14 of 17
To change the gobos in the LFS-75DMX, do the following:
1.
Disconnect the product from power.
2.
Place the product on a flat, level surface.
3.
Loosen the gobo door thumbscrew and pull off the gobo door.
4.
Pull up the gobo holder out of the product.
5.
Remove the gobo from between the slats of the gobo holder.
6.
Insert a new gobo between the slats of the gobo holder.
7.
Push the gobo holder back down into place.
8.
Replace the gobo door and tighten the gobo door thumbscrew.
Gobo Door
Gobo Holder
Gobo
LFS-75DMX User Manual