Page 1
VGA onboard, memory can run max. up to 333MHz) IDE Connector x2 (ATA/66/100/133 supported) PS. Here we use AK79G-1394 motherboard as illustration. AOpen reserves the right to revise all the specifications and information contained in this document, which are subject to change without notice.
Page 2
1. JP14 Clear CMOS You can clear CMOS to restore system default setting. To clear the CMOS, follow the procedure below. 1. Turn off the system and unplug the AC power. Everything you need to boot this 2. Remove ATX power cable from connector PWR2. motherboard is included in this 3.
Tip: If your system hangs or fails to boot because of overclocking, simply use IDE 2 <Home> key to restore the default setting or you can wait the AOpen “Watch Dog (Secondary) Timer” reset the system in five seconds and system will auto-detect hardware again.
Page 4
6. Memory & AGP Voltage Adjustment 8. Memory Module (128-Bit DDR Dual Channel) With our considerate design, you can adjust memory and AGP voltage in BIOS. The In the past, we used to have 64-bit memory bandwidth for memory access. No matter how memory voltage range is from 2.5V to 2.65V and the AGP voltage is from 1.5V to 1.6V.
Page 5
12. S/PDIF Connector (AK79D-1394, AK79G-1394) 10. Connecting Front Panel Connector S/PDIF (Sony/Philips Digital Interface) is a newest audio transfer file format, which provides impressive audio quality through optical fiber and allows you to enjoy digital audio instead of analog audio. Through a specific audio cable, you can connect the S/PDIF connector to other SPWR end of the S/PDIF audio module, which bears S/PDIF digital output.
BIOS Setup, press <Del> during POST (Power On Self Test). upgrading. Choose "Load Setup Defaults" for recommended optimal performance. Download the new version of BIOS package zip file from AOpen official web site. (ex: http://english.aopen.com.tw) Unzip the download BIOS package (ex: WAK79G1394102.ZIP) with WinZip (http://www.winzip.com) in Windows environment.
It is very possible that your keyboard press Del to see if the is defective. system reboots. AK79G-1394 R1.02 Nov. 01. 2002 AOpen Inc. Award Plug and Play BIOS Extension v1.0A During system rebooting, press Del to enter BIOS Setup. Choose “Load Setup Default".
Page 8
EIG in AOpen Bonus Pack. Dear Customer, http://english.aopen.com.tw/tech/download/manual/default.htm Thanks for choosing AOpen products. To provide the best and fastest service to our customer is our first priority. However, we receive numerous emails and Test Report: We recommend you to choose board/card/device from the phone-calls worldwide everyday, it is very hard for us to serve everyone on time.
Need help?
Do you have a question about the AK79G-V and is the answer not in the manual?
Questions and answers