Table of Contents
Advertisement
USB 2.0 Connectors
This motherboard provides eight USB 2.0 ports to connect USB devices, such as
mouse, keyboard, modem, printer, etc. There are four ports on the back panel.
You can use proper cables to connect the Front USB connector to USB modules or
front panel of chassis.
Pin1
Pin1
This motherboard comes with a game port (Joystick-Midi) for you to connect any
midi devices or joysticks. To use this function you have to have a joystick module
and connect it with a game port cable to this port on the motherboard.
Pin1
Game port
Front Audio Connectors
If the housing is designed with an audio port on the front panel, you'll be able to
connect onboard audio to front panel through this connector. Please be
informed that to have front audio ports work properly, the front audio
panel of the housing should be designed for High definition Audio jack. If
the front audio panel is not designed for High Definition Audio jack, we
strongly recommend you to connect the microphone to the back panel of
the motherboard.
Pin1
SENSE2_RETURN
PORT2L
KEY
SENSE_SEND
SENSE1_RETURN
PORT2R
PRESENCE#
PORT1R
GND
PORT1L
1
Front Audio Connector
IrDA Connector
The IrDA connector can be configured to support wireless infrared module, with
this module and application software such as Laplink or Windows Direct Cable
Connection, user can transfer files to or from laptops, notebooks, PDA devices and
printers. This connector supports both HPSIR (115.2Kbps, 2 meters) and ASK-IR
(56Kbps).
Install an infrared module onto the IrDA connector and enable the infrared
function from BIOS Setup, UART Mode, you can use this function. Please make
sure you connect correct orientation when plugging IrDA module.
Pin1
1
NC
KEY
+5V
GND
IR_TX
IR_RX
IrDA Connector
Advertisement
Table of Contents
