Manual Adjustment; Electronic Adjustment; Filling The Salt Container - Electrolux ESF6500LOW User Manual

10 www.electrolux.com
You must adjust the water soften-
er manually and electronically.

Manual adjustment

Electronic adjustment

1. Press the on/off button to activate the
appliance.
2. Press and hold, at the same time,
Program and Option for a few sec-
onds.
3. Press and hold, at the same time, De-
lay and Start until the programme in-
dicators
start to flash.
4. Press Program.
• The programme indicators

6.2 Filling the salt container

, and
and go off.
Turn the water hardness dial to the posi-
tion 1 or 2.
• The programme indicator
continues to flash.
• The acoustic signals operate. E.g.
five intermittent acoustic signals =
level 5.
• The display shows the current set-
ting of the water softener. E.g.
= level 5.
5. Press Program again and again to
change the setting.
6. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
1. Turn the cap counterclockwise and
open the salt container.
2.
Put 1 litre of water in the salt contain-
er (only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container,
start a programme.