Dip Switch Tables; Features Of Printer Types - Epson TM-U220 User Manual

Features of Printer Types

See illustration A.
Autocutter
Take up device
Paper width (mm)

DIP Switch Tables

Serial (DIP Switch 1)
SW Function
1 Data receive error
2 Receive buffer capacity 40 bytes
3 Handshaking
4 Word length
5 Parity check
6 Parity selection
7 Transmission speed
BUSY condition
8
Serial (DIP Switch 2)
SW Function
1 Print column
2 For internal use only
(autocutter)
3 Undefined
4 Serial interface selection Memory
5 Undefined
6 For internal use only
(flash memory rewriting)
7 Pin 6 reset signal
8 Pin 25 reset signal
Type A
Yes
Yes
76
On Off
Ignored Prints "?"
4 KB
XON/XOFF DTR/DSR
7 bits 8 bits
Yes No
Even Odd
4800 bps 9600 bps
Receive Receive
buffer full buffer full or
Offline
On Off
42/35 40/33
Enabled Disabled
- -
DIP switch
switch
- -
Enabled Disabled
Used Not used
Used Not used
Type B
Yes
No
76/69.5/57.5
Look at the numbers and letters in the area
indicated in the illustration. If the last
letters are "US", use the "US" tables
below. If the last letters are "STD", use the
"STD" tables.
CAUTION:
Be sure to replace the DIP switch cover
before using the printer.
Parallel (DIP Switch 1)
SW Function
1 Auto line feed
2 Receive buffer capacity 40 bytes
3~7 Undefined
8 BUSY condition
Parallel (DIP Switch 2)
SW Function
1 Print column selection
2 For internal use only
(autocutter)
3~5 Undefined
6 For internal use only
(flash memory rewriting)
7 Undefined
8 Pin 31 reset signal
Type D
No
No
76/69.5/57.5
On Off
Enabled Disabled
4 KB
- -
Receive Receive
buffer full buffer full or
Offline
On Off
42/35 40/33
Enabled Disabled
- -
Enabled Disabled
- -
Used Not used
v