Table of Contents
Advertisement
Assembly Instructions
Unpack your George Foreman Grill and check that all the parts are present.
(See fig. 1)
1. Before first use wash the grill plate, drip tray and lid in warm soapy
water. Wipe it off with a damp cloth and dry thoroughly.
DO NOT IMMERSE THE TEMPERATURE CONTROL PROBE IN WATER.
2. Place the Pedestal Stand on a flat, level surface.
3. Insert the slotted end of the Lower Pedestal Tube into the hole
in the center of the Pedestal Stand and push down firmly.
4. Insert the tapered end of the Upper Pedestal Tube into the top
of the Lower Pedestal Tube and screw the Tubes together.
5. Place the Grill Base on top of the Pedestal Tube assembly through
the hole in the center of the Grill Base. Rotate slightly so that
the tabs on the Pedestal Tube assembly align with the slots in the
Grill Base and the Grill Base is level. Lift the Locking Latch up so
it mates with the Locking Ring on the Bottom of the Grill Base and
firmly lock into place.
6. Slide the Drip Tray into position using the guiding rails into the Grill Base.
7. Attach the Lid Handle to the Lid from inside the Lid.
8. Place the Lid over the Grill. Your Barbeque Grill is now ready for use.
Fig. 2
6
Locking
Latch
Advertisement
Table of Contents
