OPTO 22 SNAP-PAC-R1 User Manual page 72

MAINTAINING THE SNAP PAC R-SERIES CONTROLLER
7. Copy the renamed strategy file to the
8. If you plan to save the strategy to flash memory, delete the following files and
9. To update, run, or test the strategy, turn off the controller, put the card in, and turn the
SNAP PAC R-Series Controller User's Guide
Remember, if you are looking at the card in the controller, you create the
directory in the
sdcard0
the directory at the top level. The controller's file system treats the card as a
strategy
directory named sdcard0.
card.
Here's an example of a strategy file in the strategy directory, looking at the card in the
controller:
directories if they are on the card:
Command file and firmware
files
/sdcard0/boot
/sdcard0/opto22/config
NOTE: If the controller has firmware 9.0a or newer and a loader version older than 6.0a, you
cannot save the strategy from the card to flash memory.
controller back on.
The controller loads the strategy from the card (verifying the signature if it is an .ssd
file), switches to the new strategy if you're using background downloading, and runs
the new strategy if you set it to autorun. If it's not set to autorun, you can start the
strategy manually using PAC Control or PAC Terminal.
directory. If you are looking at the card in a card reader, create
sdcard0/strategy
strategy
directory on the microSD
Strategy file