OPTO 22 SNAP-PAC-R1 User Manual page 44

SPECIFICATIONS, CONNECTORS, AND DIMENSIONS
Agency certifications
Warranty
Other features
1
Models manufactured before July 1, 2007 have a user-replaceable 3-volt CR2032 Lithium battery (typical service life with
power off: 5 years).
2
Connecting to a serial device requires configuration in PAC Manager; PAC Control handles communication.
3
Requires a Wired+Wireless model (SNAP-PAC-R1-W or SNAP-PAC-R2-W).
4
SNAP-PAC-R1s with serial numbers lower than 600,000 are limited to eight 4-channel digital modules per rack; remaining eight
can be analog, serial, and high-density digital modules.
SNAP PAC R-Series Controller User's Guide
(-W models only) U.S., FCC Part 15 Subpart C; Canada, IC RSS-210
(-FM models only) Factory Mutual approved
30 months from date of manufacture
• Multiple protocol support including TCP/IP, FTP, EtherNet/IP, Modbus/TCP,
SNMP v2.0c, OptoMMP™, and SMTP
• Built-in I/O processor handles up to 16 digital, analog, and serial I/O modules on the same
4
rack
• Real-time clock
• FTP server/client with file system (in RAM and in removable storage)
• Scratch Pad area for peer-to-peer communication
• Configurable link redundancy or segmented networking
for I/O-controller subnetting (when using PAC Project Professional)