Nortel 1210 User Manual page 91

(Goodbye)
Disconnecting a conferee
Use the following procedure to disconnect a conferee.
ConfDsp
(Goodbye)
Operating your IP Phone 1210
indicator. Each key press changes the
screen to show a different active
conferee.
This action has no effect on the display
of other IP Phones involved in the
conference.
2. Press the Goodbye
If configured, the
Display returns an updated count of
conferees. The LCD indicator turns off.
1. During a conference call, press the
Confdsp soft key until the conferee to
disconnect appears on the screen.
Press the Handsfree
disconnect the conferee.
2. For a single conferee, press the
Goodbye key. If configured, the
Conference Count Display
updated total count of conferees. The
LCD indicator turns off.
For multiple conferees, repeat steps 1
and 2 until all conferees are
disconnected. Then press the
key.
key.
Conference Count
button to
returns an
or
Goodbye
91