Chap. 2 - Using The Controls And Setting The Modes; Setting The Clock - DeLonghi Oven Manual

CHAP. 2 – USING THE CONTROLS AND SETTING THE MODES
2.1 HOW TO ADJUST THE CLOCK
• When this appliance is first plugged in, or after there has been a power failure, the figure 12:00 will start blink-
ing on the display.
To set the time of day, proceed as follows:
• To change the time of the control panel once it has been set, push the
setting of the time as indicated above.
• You can obtain a showing of the time of day even after the oven has started operating simply by pushing the
button (7). (The time will be shown for 3 seconds.)
1
Push the button (7).
(The hour 12 will begin blinking
on the display
.)
2
Set the time you want by turning
the knob (6). (The hour will
begin blinking on the display.)
3
Push the button (7) once
again. (The hour will disappear
from the display, and the minutes
will begi blinking.)
4
Set the time you want by turning
the knob (6).
(The minutes will begin blinking
on the display.)
5
Push the button one more time.
(The time selected will appear on
the display.)
12
14
00
35
14:35
button (7) and then proceed to a
41