Blank Search; Connections To A Tv Or Vcr - JVC GR-DF425 Instructions Manual

Blank Search

Helps you find where you should start recording
in the middle of a tape to avoid time code
interruption. ( pg. 19)
1
Load a cassette. (
2
Set the Power Switch to "PLAY" while
pressing down the Lock Button located on the
switch.
3
Press MENU. The Menu Screen appears.
4
Press SET to select "t". The VIDEO Menu
appears.
5
Press or to select "BLANK SRCH", and
press SET. The Sub Menu appears.
6
Press or to select "EXECUTE", and press
SET.
The "BLANK SEARCH" indication appears and
the camcorder automatically starts reverse or
forward search, then stops at the spot which is
about 3 seconds of tape before the beginning of
the detected blank portion.
To cancel Blank Search midway, press 8.
NOTES:
Before starting Blank Search, if the current
position is at a blank portion, the camcorder
searches in the reverse direction. If the current
position is at a recorded portion, the camcorder
searches in the forward direction.
If the beginning or end of the tape is reached
during Blank Search, the camcorder stops
automatically.
A blank portion which is shorter than 5 seconds of
tape may not be detected.
The detected blank portion may be located
between recorded scenes. Before you start
recording, make sure there is no recorded scene
after the blank portion.
pg. 16)
VIDEO PLAYBACK

Connections To A TV Or VCR

To S connector
S cable
(optional)
1 2
"Y/C"/"CVBS"
Video Out Select
Switch
To TV or VCR
VCR
A
Black to S-VIDEO IN (Connect when your TV/
VCR has S-VIDEO IN and A/V input
connectors. In this case, it is not necessary to
connect the yellow video cable.)
B
Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors.)
C
Red to AUDIO R IN**
D
White to AUDIO L IN**
* If your VCR has a SCART connector, use the
provided cable adapter.
** Not required for watching still images only.
EN
Open the cover.
To AV connector
AV cable
(provided)
3 4
Cable
Adapter*
TV
CONTINUED ON NEXT PAGE
21