Table of Contents
Advertisement
Instructions
Toasting
• Make sure the crumb tray is properly in place before using the toaster. (It is
located underneath the heating elements and can be pulled out from the side
of the toaster opposite the controls.)
• Make sure that the power cord
underneath the appliance is clamped in
the respective cable guide: there are two
guides for the cord exit, one for a 120V
flat cord and one for a 240V round cord
(as pictured, right).
• Place the toaster on an even and heat-
resistant surface and connect it to a
properly installed wall socket. The LCD
panel lights up and displays the chosen
settings (browning level, countdown time, special functions, etc.).
• Press the open/close lid button to open the lid.
• Insert the bread into the bread slots. The toaster holds two slices.
• Turn the browning control knob to your desired browning level (1 - 6). The
higher the number, the longer the toasting time. (See page 12 for hints on
toasting times for different types of bread.)
• Press the on/off button. The lid of the toaster closes automatically and the
toasting process starts. The LCD panel will display the countdown toasting
time.
• When the required toasting level has been achieved, the toaster switches
off automatically. The lid opens, moving and lifting the toast slices into their
initial position for easy removal.
NOTE: T o interrupt the toasting cycle before automatic cut-off, press the on/
off button. The lid will open and the toast slices can be removed.
• After several toasting cycles, pull out the crumb tray and clean it. (See the
cleaning instructions on page 13.)
WARNING: I f a slice of bread should get stuck during the toasting process,
unplug the appliance and let it cool down completely before trying to
remove it. Do not use any sharp metal objects to do so.
6
120V
240V
Advertisement
Table of Contents
