Table of Contents
Advertisement
Getting Started
Before first use
• Read all safety instructions on the previous pages.
• Remove all packaging materials, labels and/or stickers from the appliance
and dispose of them responsibly. Plastic wrapping can be a suffocation
hazard for babies and young children, so ensure all packaging materials are
out of their reach.
• Make sure there is no packaging material remaining in the slots.
• Fully unwind the power cord and inspect it and the plug for damage. Do not
use the toaster if it is visibly damaged or not working properly. In case of
damage, contact the after sales support line for advice on replacement.
• Clean toaster before using it for the first time (see page 13 for cleaning
instructions).
• Place the toaster on an even and heat-resistant surface. Do not place
the toaster where heat, moisture or high humidity are generated, or near
combustible materials.
• Plug the toaster into an appropriate power outlet and switch on power at the
outlet. The power socket must be readily accessible so that in an emergency
it can be easily switched off and the toaster unplugged.
• Set the browning control to the maximum level (6) and press the on/off
button.
• Let your toaster heat up for approximately four minutes without any bread.
NOTE: Due to remnants from the manufacturing process burning off, you
may notice a slight burning smell when first using the toaster. This is
no cause for concern. Place the toaster in a well ventilated area and
let it complete a few toasting cycles until no more odour or smoke is
present.
• After a short cooling down period, your toaster is now ready for use. The
usage instructions start on page 10. All parts referred to in the instructions
are listed on page 8.
After Sales Support
5
Advertisement
Table of Contents
