Clock Controlled Oven Cooking; Oven Operation - Jenn-Air JER8550 User Manual

Table of Contents

Advertisement

Oven Operation
Clock Controlled Oven Cooking
4. Press appropriate rlumber pads to enter cooking hours and
minutes.
The clock controlled oven cooking feature is used to turn the
ovenoffatapresettimeofdayordelaythestartandthenturnoff
Example: Ifcookingtimeselectedforbakingis
2hours and
the oven.
30 minutes, the display will show:
The clock mustbe functioning and set at the correct time of day
for this feature to operate correctly.
The feature can be used with either oven cooking or self-
cleaning. See page 16for instructions on delaying the start of a
clean cycle.
5. At the end of the programmed Cook Time, the oven will shut
off automatically, "End" will appear in the display and a beep
will be heard four times. Press the Stop/Clear pad.
If the program is not cancelled, there will be one beep every
30 seconds for five minutes. (If you wish to change the beeps
at the end of clock controlled cooking, see page 7.)
To Delay the Start and Turn Off Automatically:
1-4. Follow preceding steps 1-4.
5. Press the Stop Time pad. Indicator words STOP and TIME
will flash. Display will show the calculated stop time based
on the current time of day and the cook time that you entered
previously.
6. Press the appropriate pads to enter the time you wish the oven
to stop. A stop time can only be accepted for later in the day.
Example: If at 10:00you setthe oven for 350°F. and 2 hours
and 30 minutes of cooking time, the calculated stop time
would be "12:30".
Setting the Controls
If you want the stop time to be 1:00, press the number pads
"1,0,0". Four seconds later, the display will show 1:00 along
To Start Immediately
and Turn Off Automatically:
with the indicator words DELAY, STOP TIME.
1. Press the Bake pad.
• The indicator word BAKE will flash.
000 and the oven icon _
will appear.
2. Press thePreset (0) pad to set350°F. Or press the appropriate
number pads for the desired oven temperature.
7. At the end of the delayed period, the DELAY indicator word
3. Press the Cook Time pad. The indicator words COOK TIME
will go off and the oven will begin to heat.
will flash and the display will show "0HR:00".
8. At the end of the clock controlled Cook Time, the oven will
shut off automatically, "End" will appear in the display and
beep will be heard four times. Press the Stop/Clear pad.
If the program is not cancelled, there will be one beep ever)
30 seconds for five minutes. (If you wish to change the beeps'
at the end of clock controlled cooking, see page 7.)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jer8750

Table of Contents