Fitting And Removal Of Base : Prolite E2209Hds - Iiyama ProLite B2209HDS User Manual

FITTING AND REMOVAL OF BASE : ProLite E2209HDS

CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
< Installation >
A Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
B Insert stand into the monitor as shown in fi gure.
C Install the stand-base to the stand.
<Removal>
A Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
B Press and hold the hooks inside, and pull the
Stand-Base.
C Insert thin stick into hole, push stick in whilst pulling
the stand away.
Stand
Thin Stick
Release hole
BEFORE YOU OPERATE THE MONITOR
Stand
Stand-Base
Hooks
6