I Rx Speaker Function - Icom IC-M603 Instruction Manual

7
OTHER FUNCTIONS
q Push [F], then push [8•
Push ,
then push
w Rotate [SELECTOR] to select the desired foghorn pattern,
push [ENT].
• 'UNDERWAY,' 'STOP,' 'SAIL,' 'TOW' are available. (p. 41)
• Even if [ENT] hasn't been pushed, the display automatically
changes to the next step after about 5 sec. of inactivity.
e Rotate [SELECTOR] to adjust the foghorn level, push [ENT].
• The foghorn level is adjustable in 31 steps.
• Even if [ENT] hasn't been pushed, the display automatically
changes to the next step after about 5 sec. of inactivity.
Rotate
Foghorn
level
The foghorn pattern, selected
in step w, is displayed.
r To return to normal operation, repeat step q.
When a DSC call is received, the automatic foghorn func-
tion is interrupted with an automatic return to the trans-
ceiver mode. The transceiver's display indicates 'Receiv-
ing DSC calls.' (p. 32)
42
] to enter auto foghorn mode.
FOG
Push

I RX speaker function

The IC-M603 has an RX speaker function. When this func-
tion is turned ON, the received audio can be heard on the
deck or tower via a hailer speaker.
Connect a hailer speaker as described on p. 46.
q Push [F], then push and hold [7•
the RX Speaker mode.
• " " appears.
Push ,
then push and hold
for 1 sec.
w Rotate [SELECTOR] to adjust the audio output level, push
[ENT].
e To return to normal operation, repeat step q.
While in the RX speaker mode, rotate [SELECTOR] while
pushing and holding [7•
HAIL
the audio output level. After adjusting, push [ENT].
• Rotate [SELECTOR] within 1 sec. after pushing [7•
erwise the transceiver returns to the normal operation.
] for 1 sec. to enter
HAIL
] after pushing [F], to adjust
]. Oth-
HAIL