D Transmitting A Position Request Call - Icom IC-M603 Instruction Manual

6
DSC OPERATION
D D Transmitting a Position Request call
Transmit a Position Request call when you want to know a
specific ship's current position, etc.
q Enter "
 
(Push [MENU])
w Rotate [SELECTOR] to select the desired pre-programmed
individual address or "
• The ID code can be set in advance. (p. 16)
• When "
number for the individual you wish to call with the keypad.
e Push [ENT] to transmit the Position Request call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
28
" in DSC menu.
➪  
(Rotate [SELECTOR], then push [ENT].)
," push [ENT].
" is selected, set the 9-digit MMSI
r After the Position Request call has been transmitted, the
following indication is displayed.
t Push [CLR] to return to the previous indication before en-
tering the DSC menu.
• Even if [CLR] hasn't been pushed, the display automatically re-
turns to the previous indication after 2 sec. of inactivity.