Icom IC-M603 Instruction Manual page 28

6
DSC OPERATION
e The position information appears. Edit your position (lati-
tude and longitude) data directly with the keypad.
• Push [6• ] to edit N; North latitude or [7•
MNO
S; South latitude.
• Push [3• ] to edit E; East longitude or [9•
DEF
W; West longitude.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the position data.
• Push [CLR] to cancel and exit the condition.
r After editing the position data, push [ENT] to set. Then edit
the current UTC time with the keypad, push [ENT].
• Edit the digit of the current UTC time directly with the keypad.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the time.
• Push [CLR] to cancel and exit the condition.
22
t Push [DISTRESS] for 5 sec. to transmit the Distress call.
• While pushing [DISTRESS], the key backlighting blinks.
• The selected nature of the distress is stored for 10 minutes.
] to edit
PRS
y After transmitting the Distress call, the transceiver waits for
] to edit
WXY an acknowledgment call on Channel 70.
• The Distress call is automatically transmitted every 3.5 to 4.5
min.
• After 2 sec., the transceiver is set to Channel 16 automatically.
After 2 sec.