Specifications - Icom IC-446S Instruction Manual

Pmr446 fm transceiver
Hide thumbs Also See for IC-446S:
Table of Contents

Advertisement

GENERAL
• Frequency coverage
• Mode
• No. of operating ch.
• Frequency stability
• Frequency resolution
• Power supply requirement: 4.5 V (R6 × 3) or BP-202
• Current drain
• Operating temp. range : –20˚C to +55˚C (–4˚F to +131˚F)
• No. of CTCSS freq.
• Dimensions
(projections not included)
• Weight
TRANSMITTER
• Output power
• Maximum deviation
• Spurious emissions
• Ext. mic. connector
RECEIVER
• Receive system
• Sensitivity
• Selectivity
• Spurious and image rejection: Better than 91.29 dBµV/m
• Adjacent ch. rejection
• Intermodulation rejection: Better than 86.29 dBµV/m
• Audio output power
(at 4.5 V DC)
• Ext. speaker connector : 2-conductor 3.5 (d) mm/8 Ω
All stated specifications are subject to change without
notice or obligation.

SPECIFICATIONS

: 446.00625–446.09375 MHz
: F3E (FM)
: 8 (simplex)
: ±2.5 kHz (–20˚C to +55˚C),
±1.5 kHz (0˚C to +30˚C)
: 12.5 kHz
: Less than 500 mA
: 38
: 55.5(W)×102.5(H)×26.5(D) mm
: 180 g (including 3 R6 batteries)
: Less than 500 mW ERP
: ±2.5 kHz
: Less than 250 nW
: 3-conductor 2.5 (d) mm/2.2 kΩ
: Double-conversion superheterodyne
: Less than 26.5 dBµV/m
(20 dB SINAD)
: More than 8.5 kHz/–6 dB
: Better than 81.29 dBµV/m
: More than 100 mW at 10 %
distortion with an 8 Ω load
9
20

Advertisement

Table of Contents
loading

Table of Contents