Specifications - Icom IC-4088SR Instruction Manual

10
GENERAL
• Frequency coverage
• No. of operating Ch.
• Mode
• Frequency stability
• Frequency resolution
• Power supply requirement : 3 AA (R6) alkaline, BP-202, BC-149D
(negative ground)
• Current drain
• Operating temp. range
• No. of CTCSS freq.
• Dimensions
(projections not included)
• Weight
(approx.)
TRANSMITTER
• Output power
• Maximum deviation
• Spurious emissions
• Ext. mic. connector
RECEIVER
• Receiver system
• Sensitivity
• Selectivity
• Spurious & image rejection: Better than 91.29 dBµV/m
• Adjacent Ch. rejection
• Intermodulation rejection : Better than 86.29 dBµV/m
• Audio output power
(at 4.5 V DC)
• Ext. speaker connector
All stated specifications are subject to change without notice or obligation.
22

SPECIFICATIONS

(20 dB SINAD)
: 446.00625–446.09375 MHz
: 8
(simplex)
: 8K50F3E
(FM)
: ±5.6 ppm; ±2.5 kHz
: 12.5 kHz
or CP-18E
: Less than 500 mA
: –20˚C to +55˚C
: 38
: 52.5(W)×102.5(H)×26.9(D) mm
: 200 g
(including 3×AA (R6) batteries)
: Less than 500 mW ERP
: ±2.5 kHz
: Less than 0.25 µW
: 3-conductor 2.5 (d) mm/2.2 kΩ
: Double-conversion superheterodyne
: Less than 26.5 dBµV/m
: More than 8.5 kHz/–6 dB
: Better than 81.29 dBµV/m
: More than 100 mW at 10 % distortion
with an 8 Ω load
: 3-conductor 3.5 (d) mm/8 Ω