Transmitting A Command - Icom IC-F4160DS Operating Manual

■ Transmitting a command

The following Individual calls allow you to send special com-
mands. These calls will function if you are designated as a
specific station. Ask your dealer for details.
D Transmitting an Ambience Listening Call
An Ambience Listening call allows you to send a command
that will require the target station to transmit its microphone
audio.
q Push [dPMR Button] to enter the ID selection mode.
• The pre-programmed ID is displayed.
w Push [CH Up] or [CH Down] to select a desired Individual
ID.
e Push [dPMR Button] again to enter the application selec-
tion mode.
• "STATUS" is displayed.
r Push [CH Up] or [CH Down] to select "LISTENING."
t Push [Call] to transmit an Ambience Listening call to the
selected station.
• "WAIT" is displayed while transmitting.
• "OK" is displayed when an acknowledgement is received, then
the called station's microphone audio can be heard for the pre-
programmed time period.
• "FAILED" is displayed when no acknowledgment is received.
y After a specified time period, the transceiver will return to
the stand-by mode.
D Transmitting a Stun Call
A Stun call allows you to send a command that will stun the
target station.
q Push [dPMR Button] to enter the ID selection mode.
• The pre-programmed ID is displayed.
w Push [CH Up] or [CH Down] to select a desired Individual
ID.
e Push [dPMR Button] again to enter the application selec-
tion mode.
• "STATUS" is displayed.
r Push [CH Up] or [CH Down] to select "STUN."
t Push [Call] to transmit a Stun call to the selected station.
• "WAIT" is displayed while transmitting.
• "OK" is displayed when an acknowledgement is received.
• "FAILED" is displayed when no acknowledgment is received.
y After a specified time period, the transceiver will return to
the stand-by mode.
3
dPMR OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
24 24