Icom IC-F4160DS Operating Manual page 20

3
dPMR OPERATION
■ Receiving a call (continued)
D Displaying a received call log entry
Depending on the pre-programmed setting, the transceiver
stores up to 10 call log entries. Individual Voice, Status and
SDM call log entries are stored. When an 11th call is re-
ceived, the oldest call log entry will be removed, and the last
received call will be added. When the transceiver is turned
OFF, all the log entries are deleted.
q Push [dPMR Button] twice to enter the application selec-
tion mode.
• "STATUS" appears.
w Push [CH Up] or [CH Down] to select "CALL LOG."
e Push [dPMR Button] again to display a call log entry.
When the transceiver
has a call log entry
VOICE
0000001
dPMR CALL TXCE CLR
r Push [CH Up] or [CH Down] to display a desired entry.
• If a Status or SDM call log entry is selected, not only the calling
station's ID but also the status message or message are dis-
played.
t Push [dPMR Button] again to return to the stand-by
mode.
17
When the transceiver
has no call log entries
NO LOG
dPMR CALL TXCE CLR
NOTE: Depending on the pre-programmed settings, push-
ing [Call] while displaying a call log entry makes a Voice
call using the entry's ID. However, if a Status or SDM call
log entry is selected, the transceiver makes a Voice call
using the last selected Individual or Talkgroup ID.