Table of Contents
Advertisement
3
dPMR OPERATION
■ Receiving a call (continued)
D Receiving an SDM
q When an SDM is received:
• Rings sound.
• The calling station's ID (or name) and the SDM are displayed.
The received
message
Calling station's ID
NOTE: When the SDM includes more than 12 charac-
ters, it automatically scrolls.
• Push [Status Up] or [Status Down] to stop scrolling, or
manually scroll the message.
• " " appears.
RETURN TO
ID
dPMR CALL TXCE CLR
w Push [Clear] to return to the stand-by mode.
15
Message 1
ID
0000001
dPMR CALL TXCE CLR
OFFICE
0000001
Scrolls
D Receiving a Stun, Kill or Revive call
If an Individual call with a Stun or Kill command is received
from a specified station, the transceiver will display "SORRY,"
and becomes unusable.
NOTE: If the transceiver receives a Stun, Kill, or Revive
command from a station other than the specified ones,
the call will be ignored, and the transceiver will not be
stunned, killed, or revived.
➥ When a Stun command is received, the transceiver is disa-
bled*
. In that case, receiving a Revive command or input-
1
ting the password*
is necessary to operate the transceiver
2
again.
*
1
Depending on the pre-programmed settings, receiving a Stun
command inhibits only transmission, but the transceiver still can
receive.
*
2
Depending on the pre-programmed settings.
➥ When a Kill command is received, the transceiver is disa-
bled. In that case, re-programming the transceiver is nec-
essary to operate the transceiver again.
D Receiving a Status Polling call
If a Status Polling call is received, the transceiver will auto-
matically transmit its current status.
Advertisement
Table of Contents
