Biis Operation; Default Setting - Icom IC-F50 Instruction Manual

4
I Default setting
The following functions are assigned to each programmable switch
as the default. Ask your dealer for details.
[P0]; Call
[P1]; Digital
[P3]; Moni(Audi)
[ ]/[
[P2]/[Red]; Null
19

BIIS OPERATION

: Push to transmit a 5-tone/BIIS call when the
selected channel is a 5-tone or MSK channel,
respectively.
: Push to select the call list ID/transmit mes-
sage, or to display the receive message
record for selection.
: Push this key after the communication to
send a "clear down" signal during MSK chan-
nel operation.
]; CH Down/Up
: While in the standby condition, selects the
operating channel.
After pushing [Digital] or [TX Code CH Se-
lect], selects call list or TX code channel, re-
spectively.
: No function is assigned.