D-Link DPH-300S User Manual page 39

Making a Call
Receiving a Call : PSTN or VoIP
When an incoming PSTN or VoIP telephone call is
detected, the handset will ring and the L1 icon will
be displayed in the LCD. If the caller can be
identified, the caller's number or ContactList entry
will be displayed. If the caller's telephone
number is currently stored in the handset's phone
book, the caller's name will be displayed along
with the telephone number.
To answer the call, simply pick the handset up
from the charger base and press the PSTN Dial
Tone button.
To end the call, either press the On Hook button
or replace the handset on the charger base.
D-Link DPH-300S User Manual
Incoming Call
LED
This red LED
will flash to
indicate an
incoming
PSTN or VoIP
telephone call
IP
Press this
button to
answer an
incoming
VoIP
telephone call.
PSTN Dial Tone
Press this button to dial a
telephone number (over
the regular telephone line
(PSTN)). You will hear
the familiar dial tone −
and then the handset will
dial the telephone
number as you entered it.
On Hook
Press this
button to end
a telephone
call. You can
also simply
place the
handset in the
charger base
to end any
telephone call.
This will end
both a PSTN
and a VoIP
telephone call.
39