Table of Contents
Advertisement
Configuration
Whenever you want to configure your DPH-300S, you can access the Configuration Menu by opening the web-browser and typing in the IP Address
assigned to the DPH-300S. The DPH-300S has DHCP enabled by default, so its IP Address will be that assigned by the DHCP server on your LAN.
This DHCP server is often contained in a multi-port Ethernet router. See your router's documentation to determine the addresses assigned by its
DHCP server. If you do not know the IP address assigned to the DPH-300S (or you do not yet have a multi-port Ethernet router) you can connect
to the DPH-300S by the following method:
Connect the WAN port on the DPH-300S directly to the Ethernet port on your PC.
•
•
Set your PC to have a static IP address of 10.1.1.2 with a subnet mask of
255.0.0.0 and a default gateway of 10.1.1.1
•
Switch the DPH-300S on
•
Open the web browser on your PC
Type in the IP Address of the DPH-300S (http://10.1.1.1)
•
Type
admin
in the User Name field
•
admin
•
Type
in the Password field
Click OK
•
D-Link DPH-300S User Manual
Using the Configuration Page
25
Advertisement
Table of Contents
