D-Link DPH-300S User Manual page 37

Making a Call
Making a Call to the PSTN in Standby Mode
If you have connected your PSTN telephone line
to the DPH-300S's Base, you can make a
telephone call to any regular telephone using the
PSTN by following these steps:
Pick up the handset and dial the number as you
normally would. You can clear any or all of the
numbers you have entered by pressing the Clear
button. You will hear the familiar PSTN dial tone,
the handset and L1 icon will appear in the
handset's LCD display.
This number will be dialed as you enter it.
To end the call, either press the On Hook button
or replace the handset on the charger.
D-Link DPH-300S User Manual
PSTN Dial Tone
Press this button
to dial a
telephone
number (over the
regular telephone
line (PSTN)).
You will hear the
familiar dial tone
− and then the
handset will dial
the telephone
number as you
entered it.
Keypad
You can just
dial a regular
telephone
number and
then press the
PSTN Dial
Tone button.
The number
will be
displayed in
the LCD.
On Hook
Press this
button to end
a telephone
call. You can
also simply
place the
handset in the
charger base
to end any
telephone call.
This will end
both a PSTN
and a VoIP
telephone call.
Clear
Press this button to
erase a single digit
of a telephone
number you have
entered while the
handset is in
Standby Mode.
Holding this button
for a couple of
seconds will erase
all of the digits of
the telephone
number
37