Pair The Headset To Your Bluetooth Phone - Uniden BT112 User Manual

1. Connect the adapter to the power connector on the top of the headset,
then plug it into a standard 120 volt AC (regular indoor) power outlet.
The blue LED remains on while the headset is charging.
2. Charging is complete when the blue LED turns off.
The headset beeps every 30 seconds when the battery is low. The headset
may power off if it is not charged within 30 minutes.

Pair the headset to your Bluetooth phone

Pairing is like "introducing" two Bluetooth devices and giving them
permission to connect to each other. If you want to use the headset with
more than one phone, you need to pair it with each phone separately.
Once a phone and the headset are paired, they can connect automatically
whenever they detect each other.
NOTE: The headset goes into Pairing mode automatically the first time you use it.
1. Make sure the headset is powered off and the power adapter is not
connected (you can't use the headset while it's charging).
2. Press and hold MFB for 5 seconds until the blue LED is steady on, then
release it. The headset is in pairing mode and should be visible to other
Bluetooth devices.
5