Related Manuals for Uniden BT112APT
Summary of Contents for Uniden BT112APT
- Page 1 BT112 Bluetooth® Headset User’s Guide Also included in this package: AC Head DC Head USB Cable Extra ear cushions Questions? Problems? Get help on the web at www.uniden.com or call our Customer Service line at 800-292-2294.
-
Page 2: Getting To Know The Headset
Getting to Know the Headset CAUTION! Using the headset at high volume can cause permanent hearing loss. To reduce the risk of hearing damage, use the minimum volume level necessary (see Avoid Hearing Damage section). Power Earhook port ring Multifunction button Volume button... - Page 3 To do this... Do this... Button Power on headset Press and hold for 3 seconds. Get into pairing mode Press and hold for 5 seconds. Multifunction Button (MFB) Power off headset Press and hold for 4 seconds Refer to later sections in this manual for specific operational functions. Increase volume on a call Press and release VOL side button.
-
Page 4: Setting Up Your Headset
If the LED... It means... Blinks twice every 5 seconds The device is in connectable mode. Blinks once every 6 seconds The device is in connected mode. Blinks 3 times every 5 seconds The device is in an active call. Is on The device is in pairing mode. -
Page 5: Pair The Headset To Your Bluetooth Phone
Use ONLY the power adapter supplied with the headset! Using any other adapter could damage your headset, create a fire hazard, or cause a risk of electric shock. 1. Connect the adapter to the power connector on the top of the headset, then plug it into a standard 120 volt AC (regular indoor) power outlet. -
Page 6: Connecting To Your Phone
3. On your phone, start a search for Bluetooth headsets or handsfree devices. (This process may take several seconds, and it will be different for each phone; see your phone’s manual for detailed instructions.) 4. Your phone should discover a device called BT112 or Headset. If your phone asks if you want to pair with this device, answer yes. -
Page 7: Using Your Headset
• Whenever you turn the headset on, it will automatically try to connect to whatever device it was connected to last. • If the headset loses the connection (e.g., if your phone is out of range), it reconnects automatically if the phone is back in range within 1 minute. After 1 minute, you must press MFB to manually reconnect to the phone. -
Page 8: Available Features
If you can’t find your sweet spot or if the cushion doesn’t fit comfortably in your ear, change it to one of the other sizes that came with the headset. Pull the cushion off gently and snap a new one on. Wearing the headset on your left ear If you want to wear the headset on your left ear, slide the earhook off and turn it over. - Page 9 To do this... Do this... Make a call from your mobile phone as usual; your phone should automatically send the call to the headset. If it Make a call doesn’t, press and hold for 2 seconds to manually send the call to the headset. Answer a call While the call is ringing, press Hang up...
-
Page 10: Troubleshooting And Maintenance
Activate voice dialing With the phone in standby, press and hold MFB for 2 seconds then release. When you hear a beep, start using your phone’s voice commands. (Your phone must support voice dialing, and all commands must be pre- programmed.) To deactivate voice dialing, press and hold MFB for 2 seconds until you hear a beep. - Page 11 If... Try... - Making sure your phone is in pairing mode. Check your phone’s manual for instructions on Bluetooth device pairing. The headset won’t pair - Turning the headset off. Wait at least 10 seconds, then with my phone. try again. (See page 5.) - Making sure your phone supports the Bluetooth headset or Hands Free Profile.
-
Page 12: Reset The Headset
Reset the Headset Make sure the headset is not connected to any mobile phones. Push and hold MFB + VOL for 4 seconds. When reset is successful, the LED blinks 5 times and all mobile phone links are deleted. General Information • You cannot use the headset while it is recharging. - Page 13 • When the battery only has enough charge for about 30 minutes of talk time, the headset triggers a low battery alert: you’ll hear a periodic beep. • When the battery no longer has enough charge to operate the headset, the headset will power off;...
-
Page 14: Safety And Handling Information
If the noise continues, there may be interference on your phone itself, and any noise in the phone’s connection will come through on the headset, too. Transfer the call to your phone and see if the audio quality improves. If it doesn’t, check around for things that might interfere with your phone. - Page 15 • Set the volume at the minimum level needed to hear in the current environment. If possible, use your headset in quiet surroundings or try to move to an area with less background noise before adjusting the volume. • Start with the volume at its lowest setting, then gradually increase it until you can hear.
-
Page 16: Important Safety Instructions
Important Safety Instructions Uniden America Corporation DOES NOT represent this product to be waterproof. To reduce the risk of fire, electrical shock, or damage to the product, DO NOT expose this product to rain or moisture. When using the headset, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: • Do not turn on the car with the headset plugged into the car charger. -
Page 17: Fcc Notice
• Check the laws and regulations on the use of mobile phones and hands- free equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions require. -
Page 18: Industry Canada Statement
Uniden accessories supplied or designed for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided. Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 19 Uniden, or f) installed or programmed by anyone other than as detailed by the owner’s manual for this product.
- Page 20 Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Service 4700 Amon Carter Blvd.