Uniden BT112 User Manual page 3

Button To do this...
Power on headset
Pair with cellphone
Multiunction
Button (MFB)
Power off headset
Refer to later sections in this manual for specific operational functions.
Increase volume on a call Press and release VOLUME side button.
Volume
Decrease volume on
a call
What the LED means
The BT112 has a single blue LED. It blinks or stays on according to the
current action or headset status.
If the LED...
Blinks  times
Blinks  times
Blinks twice every 5 seconds
Do this...
Press and hold for  seconds.
Press and hold for 5 seconds.
Press and hold for 4 seconds
Press and release VOLUME side button until the
volume level cycles through increasing the volume
and returns to the lowest volume level.
It means...
The device is powering up.
The device is powering down.
The device is in connectable mode.