Pair The Headset To Your Bluetooth Phone - Uniden BT229 User Manual

Pair the headset to your Bluetooth phone

Pairing is like "introducing" two Bluetooth devices and giving them permission to connect
to each other. If you want to use the headset with more than one phone, you need to pair
it with each phone separately. Once you pair a phone to the headset, the two devices can
connect automatically whenever they can detect each other.
Before you can use your headset, you must pair it with a Bluetooth-enabled device (such as
Bluetooth mobile phone).
1: Make sure the headset is powered off and the power adapter is not connected (you
can't use the headset while it's charging).
2: Press and hold MFB until the LED flashes alternating red and blue (approximately 6
seconds), then release. The headset is in pairing mode and should be visible to other
Bluetooth devices.
3: Set your Bluetooth phone into discover mode. (Check the manual that came with your
phone for instructions.)
4: When your phone asks if you want to pair with the headset, confirm this by pressing "yes"
or "ok".
5: When the phone asks for a passkey or PIN, enter 0000 (4 zeros).
5