HUSABERG Edition 2004 Owner's Manual page 13

OPERATION INSTRUMENTS
SPEED/AVS1 (AVERAGE SPEED 1) DISPLAY MODE
AVS1 is always active and shows the average speed based on the
TRP1 and STP1 figures. The calculation of this figure is activated by
the first impulse received from the wheel sensor and stops 3
seconds after the last impulse is received.
+ button no function
– button no function
press the MODE button to change to the next mode
press and hold the MODE button 3 seconds to reset the TRP1,
AVS1 and STP1 figures to 0.
SPEED/STP1 (STOP 1) DISPLAY MODE
STP1 shows the traveling time based on TRP1 and continues to
count whenever it receives impulses from the wheel sensor. The
calculation of this figure is activated by the first impulse received
from the wheel sensor and stops 3 seconds after the last impulse is
received.
+ button no function
– button no function
press the MODE button to change to the next mode
press and hold the MODE button 3 seconds to reset the TRP1,
AVS1 and STP1 figures to 0.
SPEED/TRP2 (TRIP 2) DISPLAY MODE
The TRP2 trip meter is always active and counts to 999.9. Contrary
to TRP1, the displayed figure can be changed using the + and –
buttons. This is a very useful function for trips taken according to a
roadbook.
TRP2 is activated by the first impulse received from the wheel sen-
sor and stops automatically 3 seconds after the last impulse is
received.
+ button increases the TRP2 figure
– button decreases the TRP2 figure
press the MODE button to change to the next mode
press and hold the MODE button 3 seconds to reset TRP2 to 0
SPEED/AVS2 (AVERAGE SPEED 2) DISPLAY MODE
AVS2 shows the average speed based on the TRP2 and STP2 figu-
res. The calculation of this figure is activated by the first impulse
received from the wheel sensor and stops 3 seconds after the last
impulse is received.
The displayed figure will deviate from the actual average speed if
TRP2 was changed manually or if STP2 was not stopped after the
trip.
+ button no function
– button no function
press the MODE button to change to the next mode
press and hold the MODE button 3 seconds to change to the next
mode
- 12 -