Audio Adjust - Denon AVR-3311 Owner's Manual

Audio Adjust

n Surround Parameter
Adjust surround sound parameters. It may not be possible to set this item depending on the input
signal.
Setting items
Mode n In the PLgx or PLg mode
Set the play modes for the
Cinema : Surround sound mode optimized for movie sources.
different surround modes.
Music : Surround sound mode optimized for music sources.
Game : Surround sound mode optimized for games.
Pro Logic : Dolby Pro Logic playback mode (PLg mode only).
n In the PLgz mode
Height : Dolby PLgz Height playback mode.
n In the DTS NEO:6 mode
Cinema : Surround sound mode optimized for movie sources.
Music : Surround sound mode optimized for music sources.
• When "Surround Parameter" – "F.Height" (vpage 69) is set to "ON",
the "Height" mode is set automatically.
• The "Music" mode is also effective for movie sources including a lot of
stereo music.
Cinema EQ ON : "Cinema EQ" is used.
Soften the treble range OFF : "Cinema EQ" is not used.
of movie soundtracks for
better understanding.
Auto : Automatic dynamic range compression on/off control according to
DRC
Compress dynamic range source. This can be set in the Dolby TrueHD mode.
(difference between loud Low / Mid / High : These set the compression level.
and soft sounds). OFF : Dynamic range compression always off.
D.Comp Low / Mid / High : These set the compression level.
Compress dynamic range OFF : Turn dynamic range compression off.
(difference between loud
and soft sounds).
LFE –10dB – 0dB
Adjust the low-frequency
For proper playback of the different sources, we recommend setting
effects level (LFE).
to the values below.
• Dolby Digital sources : "0dB"
• DTS movie sources : "0dB"
• DTS music sources : "–10dB"
C.Image 0.0 – 1.0 (0.3)
Assign center channel
signal to front left and right
channels for wider sound.
Remote control operation
buttons
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
Panorama ON : Set.
Assign front L/R signal also OFF : Do not set.
to surround channels for
wider sound.
Dimension 0 – 6 (3)
Shift sound image center
to front or rear to adjust
playback balance.
C.Width 0 – 7 (3)
Assign center channel
signal to front left and right
channels for wider sound.
Delay Time 0ms – 300ms (30ms)
Adjust delay time to control
sound stage size.
Effect Lev. 1 – 15 (10)
Adjust effect signal level.
Set to a lower level if the positioning and sense of phase of the
surround signals seems unnatural.
Room Size Small : Simulate acoustics of a small room.
Determine size of acoustic Medium-S : Simulate acoustics of a medium-small room.
environment. Medium : Simulate acoustics of a medium room.
Medium-L : Simulate acoustics of a medium-large room.
Large : Simulate acoustics of a large room.
NOTE
"Room Size" does not indicate the size of the room in which sources are
played.
F.Height ON : Audio is output from the front height speaker.
Determine whether to use OFF : Audio is not output from the front height speaker.
front height channel.
NOTE
• "F.Height" is displayed with the settings listed below.
• When "Amp Assign" (vpage 75) is set to "Normal".
• When the "Speaker Config." – "F.Height" setting (vpage 75) is set to
other than "None".
• "F.Height" cannot be set if the HD Audio source being played includes a
front height channel. In this case, the Front height channel is played back
without decoding in PLgz mode, using the input signal.
Confirm the setting
ENGLISH
Audio/Video Adjust
Setting details
69
Return to previous menu